
What Does Tile Work Cost in Sacramento? A 2026 Price Guide for Showers, Backsplashes & Floors
Updated: 2 days ago
Last updated: November 19, 2026
Published: 2026-11-13

If you're planning a shower, backsplash or new tile floor anywhere from Sacramento and Elk Grove to Roseville, Rocklin, Folsom and El Dorado Hills, the first question is usually the same: what will this actually cost?
Online calculators use national averages. Sacramento sits in the middle: labor costs less than in the Bay Area but more than the national average, and a lot of homes here date from the 1960s–1980s, with their own surprises behind the walls. Below are the typical ranges we see in published 2025–2026 cost data for the Sacramento region, along with what moves a project up or down.
These are planning ranges, not quotes. Every home is different, and the only way to know your number is to look at your space.
Planning a tile project? Mike offers free, no-pressure estimates across the Sacramento region and the Bay Area. Text a few photos of your space to (916) 847-2825 and he'll call you to talk it through, or request a free estimate.
Quick answer
Tile floors (ceramic or porcelain): about $12 – $25 per sq ft installed
Natural stone floors: about $20 – $45 per sq ft installed
Retiling a tub/shower surround: $3,200 – $7,000
Full walk-in shower rebuild: $8,000 – $16,000 (glass not included)
Kitchen backsplash (about 30 sq ft): $900 – $3,500
Shower tile
Retiling a tub/shower surround: $3,200 – $7,000. For a standard 60–100 sq ft tub surround, this usually covers tearing out the old tile, new backer board, a proper waterproofing membrane and new ceramic or porcelain tile. Most projects land around $4,000–$5,500.
Full walk-in shower rebuild: $8,000 – $16,000 (glass not included). Taking a shower down to the studs, building a new pan, waterproofing everything and adding a niche. Frameless glass typically adds another $1,500–$3,500.
Shower pan replacement: $2,000 – $4,500. Replacing a leaking tiled shower floor almost always means removing the bottom row or two of wall tile so the new waterproofing can tie in properly. That's why it costs more than people expect.
For a deeper breakdown by tile type, size and add-ons, see our shower tile cost guide.
Kitchen backsplash
For a typical 30 sq ft backsplash:
Ceramic or subway tile: $900 – $2,000
Mosaic, natural stone or a herringbone pattern: $1,600 – $3,500
Patterns like herringbone and diagonal layouts take more cuts and more time, usually adding about 20% to the labor. More detail is in our backsplash cost guide.

Tile floors
Ceramic or porcelain, installed: about $12 – $25 per sq ft
Natural stone, installed: about $20 – $45 per sq ft
Small bathroom floor (40–60 sq ft), including removal: $1,600 – $3,600
Kitchen floor (150–200 sq ft): $3,500 – $7,500
Living areas and hallways: priced per sq ft, with large open rooms usually landing toward the lower end per foot
Add-ons to plan for:
Removing old tile: about $2 – $6 per sq ft, plus haul-away
Leveling an uneven floor: about $2 – $6 per sq ft for typical patching
Raised-foundation homes: if the subfloor is soft or damaged, plywood repair is priced separately once the floor is opened up
Heated bathroom floors
Adding an electric heated floor to a small bathroom: $1,200 – $3,000. That covers the heating mat or Schluter DITRA-HEAT membrane, the thermostat and the electrician's work for a dedicated circuit. Running costs are usually modest: see what a heated floor costs to run on SMUD, PG&E and Roseville Electric.
Fireplace tile
Tiled fireplace surround (about 20–30 sq ft): $1,200 – $3,800
Natural stone or a custom design, including removing the old surround: $3,800 – $6,500
Tile repair
Replacing a few cracked tiles: $300 – $900 (most contractors have a minimum charge)
Regrouting a standard shower: $600 – $1,300, plus about $150 – $350 to recaulk
Matching an older or discontinued tile is the hidden challenge with repairs. Sometimes it's simpler and better-looking to redo a whole wall section than to patch.
Want your actual number, not a range? Every home is different. Mike looks at your space, explains your options in plain English and sends a clear written proposal by email. Free, and no obligation. Call or text (916) 847-2825 · Request a free estimate
What pushes the price up in the Sacramento area
Older homes. Many homes built before the 1980s have mud-set tile (a thick mortar bed) that is slow to remove. Old showers can hide dry rot or failing drains. Homes built before 1978 may need lead-safe work practices, and older materials sometimes need asbestos testing.
Slab vs. raised foundation. Many newer homes in Elk Grove, Roseville and Folsom sit on concrete slabs, which are great for tile but often need crack isolation and leveling. Older raised-foundation homes in Land Park, East Sacramento and Carmichael can need subfloor stiffening before tile goes down.
Moving plumbing or going curbless. Relocating a valve or drain, or building a curbless walk-in shower, adds work and usually a permit.
Large-format and premium tile. Big porcelain tiles and natural stone take more prep, flatter floors and more careful handling.
Patterns. Herringbone, chevron and diagonal layouts add cutting time, usually 15–25% more labor.
What's usually not in these numbers
Permits (fees vary by city, so check with your city or county building department), sales tax on materials, plumbing fixtures and valves, drywall and paint repair outside the tiled area, and any lead or asbestos testing.
Sacramento vs. Bay Area prices
The same project usually costs about 15–25% less in the Sacramento region than in the Bay Area, mostly because of labor rates, parking and access. If you're comparing, see our Bay Area tile cost guide.
How to get an accurate number for your project
The fastest way to a real price is to share:
A few photos of the space as it is today
Rough measurements (even approximate is fine)
The tile you have in mind, or the look you're going for
Your city and any HOA rules
With that, Mike can tell you what your project will realistically involve, what's included and what to watch for. No pressure, no runaround. Comparing bids? Here's how to compare tile installation estimates.
About these ranges: they're based on published 2025–2026 cost data, including Sacramento-area flooring and contractor cost guides, national guides from Angi, HomeGuide and This Old House, and U.S. Bureau of Labor Statistics wage data, adjusted for the Sacramento region. They're meant to help you plan. Your quote will depend on your space, materials and scope.
Common tile cost questions
How much does it cost to tile 1,000 sq ft?
In the Sacramento area, plan on roughly $12,000 – $25,000 for 1,000 sq ft of ceramic or porcelain tile, installed. Natural stone runs about $20,000 – $45,000. If old tile or flooring has to come out first, add about $2,000 – $6,000 for removal and haul-away. Large open areas usually land toward the lower end per square foot, because there are fewer cuts than in a bathroom.
How much does a tile installer charge per hour?
Most tile contractors, including Versa Tile, price by the project or by the square foot rather than by the hour, so you know the full cost before work starts. When skilled tile setters in the Sacramento area do bill hourly, it is typically around $55 – $95 an hour, depending on the job. A per-project price protects you if the work takes longer than expected.
How much does it cost to install 12x24 tile?
Large-format tile like 12x24 usually costs about $14 – $28 per sq ft installed in the Sacramento area, a little more than standard-size tile. The extra goes into prep: big tiles need a very flat floor, full mortar coverage and leveling clips so the edges don't sit unevenly. If the floor needs leveling, that is priced separately (about $2 – $6 per sq ft).
Do I tip the tile installers?
Tipping isn't expected. If you're happy with the work, the best thank-you is a Google review or a referral to a friend. Cold drinks on a hot day are always appreciated, too.
Related services and planning guides
Why homeowners choose Versa Tile
Licensed California tile contractor (CSLB #1088410) with 15+ years of experience
Waterproofing done right, using Schluter systems in showers and wet areas
Clean, careful job sites: the work area is blocked off, and homeowners often tell us it's cleaner when we leave than when we arrived
Straight answers: a written proposal before work starts, and help choosing tile if you want it
120 five-star reviews on Google, Yelp and Houzz
Plan your tile project
Related service: Shower tile installation
Planning a project? Call or text Mike at (916) 847-2825 or request a free estimate.



Comments