top of page

What Does a Heated Bathroom Floor Cost to Run? (SMUD, PG&E & Roseville Electric)

Versa Tile
Nov 12
3 min read

By Mike Ross · Published November 12, 2026

A heated bathroom floor feels like a luxury, but it usually costs less to run than people expect. Here's how to estimate it for your own bathroom, with real numbers for SMUD, PG&E and Roseville Electric customers.

The short answer

For a typical bathroom with about 40 square feet of heated floor, running the floor for the equivalent of 4 hours a day at full power works out to roughly $8 a month on SMUD, $9–12 a month on Roseville Electric and about $24 a month on PG&E. A bigger primary bath costs about twice that. Your real number depends on your rate, how much floor is heated and how long the thermostat runs.

How to estimate it yourself

Running cost = heated area × watts per square foot × hours a day × your price per kWh

  • Heated area: only the floor you walk on. We don't heat under the vanity, the tub or the toilet, so a 60 sq ft bathroom often has only 35–45 sq ft of heated floor.

  • Watts per square foot: Schluter's DITRA-HEAT cable puts out about 12.7 watts per square foot at its standard spacing. So 40 sq ft draws about 508 watts (0.5 kW) while it's heating.

  • Hours a day: a programmable thermostat warms the floor before you get up and shuts off when you're gone. Once the tile is warm, the cable cycles on and off, so 4 hours of full-power equivalent a day is a reasonable planning number for a morning-and-evening schedule.

  • Your price per kWh: on your bill, or on your utility's rate page.

Example: 0.5 kW × 4 hours = about 2 kWh a day, or about 61 kWh a month.

What that costs by utility (2026 rates)

  • SMUD (Sacramento, Folsom, Rancho Cordova, Elk Grove): SMUD's 2026 Fixed Rate is $0.1371 per kWh from October through May, the months you'll actually use floor heat. 61 kWh × $0.1371 ≈ $8 a month.

  • Roseville Electric (Roseville): Roseville's posted residential energy charge is $0.1469 per kWh for the first 500 kWh a month and $0.1912 above that. That puts 61 kWh at about $9–12 a month.

  • PG&E (El Dorado Hills, Rocklin, Granite Bay and the Bay Area): PG&E's average residential rate is around 39 cents per kWh in 2026. 61 kWh × $0.39 ≈ $24 a month. On PG&E's E-TOU-C plan, peak pricing runs 4–9 p.m., so a morning schedule mostly falls in cheaper off-peak hours.

A larger primary bathroom with about 80 sq ft of heated floor roughly doubles these numbers: about $17 a month on SMUD and around $48 on PG&E with the same schedule. Rates change, so check your latest bill for your exact price.

Ways to keep the running cost down

  • Use the schedule. Most of the comfort comes from a warm floor first thing in the morning and in the evening.

  • Heat only where you stand: in front of the vanity, the path from the door and outside the shower.

  • On a concrete slab, use a thermal break. Without one, the slab soaks up heat and the floor takes longer to warm. See our guide to heated floors on a concrete slab.

  • On PG&E time-of-use plans, avoid running the floor from 4 to 9 p.m. if you can.

What about the installation cost?

Running cost is only half the picture. For what installation involves and what drives the price, see Heated Bathroom Floors: Are They Worth It? and our explainer on Schluter DITRA-HEAT.

Thinking about a heated floor?

We install Schluter DITRA-HEAT heated floors under new tile across the Sacramento area and the Bay Area. See our heated bathroom floor installation page, or call or text Mike at (916) 847-2825 for a free estimate.

Sources: SMUD 2026 Fixed Rate · Roseville Electric residential rates · PG&E residential rate plan pricing · Schluter DITRA-HEAT-E-HK cable specifications (12.7 W/sq ft at standard spacing).

Recent Posts

See All

Comments


Get tile tips by email

New posts on showers, backsplashes and floors from Mike. No spam, unsubscribe anytime.

Thanks for submitting!

bottom of page