top of page

How to Choose a Luxury Tile Installer: 10 Questions to Ask

Versa Tile
6 days ago
4 min read

Last updated: November 16, 2026


Published: 2026-11-16


When you've chosen book-matched marble, handmade zellige or large porcelain slabs, the tile is only half the result. The other half is the person setting it. A great stone can look cheap with uneven edges, crooked veining or grout that stains, and a modest tile can look stunning in skilled hands.


Whether you're a homeowner or an interior designer, these are the questions that separate a true high-end tile installer from a good general tiler, and what a strong answer sounds like.


1. "Can I see work in this exact material?"

Ask for photos of finished jobs in the same material and format you've picked: natural marble, zellige, large-format slabs or intricate mosaic. Each one behaves differently. Someone who sets porcelain beautifully may never have handled a soft, translucent marble.


Good answer: close-up photos of corners, edges, niches and transitions, not just wide shots. The details are where luxury work shows.


2. "How will you lay out the tile before you set it?"

High-end tile is planned on paper and on the floor before any mortar comes out. A careful installer centers the layout on the room's focal points, avoids thin slivers at edges, and lines up grout joints with niches, valves and windows.


Good answer: a dry layout or a drawing you can approve first, especially for patterns like herringbone, chevron or large-format grids.


3. "How do you handle book-matched marble?"

Book-matched slabs are cut in sequence so the veining mirrors across the seam, like an open book. That only works if the pieces stay in order and are installed in the right orientation.


  • Slabs or tiles should be numbered and laid out together before setting.

  • You should approve the veining placement, since it's permanent once set.

  • Seams should be tight and flat, and edges finished cleanly.


Good answer: a clear plan to lay out the whole set with you, plus a note about extra material in case a piece breaks. A replacement slab rarely matches.


4. "What setting materials will you use for natural stone?"

Natural stone needs the right products. White and light marble can show shadows or stains from gray thinset, so installers typically use white mortar made for stone. Some stones, like certain green marbles, are sensitive to moisture and need specialty setting materials.


Good answer: the installer names the mortar and grout and explains why they chose them for your stone, plus how and when it will be sealed.


5. "How do you install zellige?"

Zellige is handmade and irregular. Every tile varies in size, thickness, color and surface, and that charm is the point. It also means it can't be set like uniform tile.


  • Tiles should be blended from several boxes so color varies naturally across the wall.

  • Because the surface is uneven, the goal is a pleasing overall plane, not a perfectly flat one.

  • Unglazed edges are often sealed before grouting so grout doesn't stain them.

  • Plan for more extra material than usual, since chipped or unusable pieces are common.


Good answer: the installer talks about blending, sealing and setting expectations before they start.


6. "How will you keep large tiles flat?"

Large-format tile and porcelain slabs show every high spot. The floor or wall has to be very flat before tile goes down, and each tile needs full mortar coverage.


Good answer: the installer checks flatness first, budgets for leveling if needed, and uses back-buttering and a leveling system to keep edges even (called lippage).


7. "What's behind the tile in my shower?"

Luxury finishes over poor waterproofing will fail. Ask exactly what system goes behind the tile and under the floor, how drains and niches are sealed, and whether the shower is flood tested before tile goes on.


Good answer: a named, complete system, such as a Schluter shower system, installed as a whole, with a clear answer on warranty.


8. "Are you licensed and insured?"

In California, a tile contractor should hold a C-54 (Ceramic and Mosaic Tile) license. You can check any license on the CSLB website. Ask for a certificate of insurance too, which most condo HOAs require anyway.


9. "What's in the written scope?"

A professional proposal spells out demolition, prep, waterproofing, layout, trim and edge details, setting materials, grout, sealing, protection of the home, cleanup and schedule. Vague bids are how surprise costs appear.


10. "How do you work with my designer?"

On high-end projects, the tile setter often works from a designer's drawings. Ask how they handle layout questions, material approvals and changes on site. Good installers raise problems early, before tile is set, not after.


Red flags

  • No photos of work in your material

  • Starts setting without showing you a layout

  • Can't say which mortar, grout or waterproofing they'll use

  • Pushes to skip leveling or sealing to save time

  • No license number or insurance certificate

  • A one-line bid with no written scope


Related services and planning guides


Planning a high-end tile project?

Versa Tile is a licensed C-54 tile contractor (CSLB #1088410) serving Folsom, the Sacramento region and the Bay Area. Text Mike photos of your space and your tile selections at (916) 847-2825, or request a free estimate. Ask him any of the questions above.


Recent Posts

See All

Comments


Get tile tips by email

New posts on showers, backsplashes and floors from Mike. No spam, unsubscribe anytime.

Thanks for submitting!

bottom of page